ARMOR VCI in Egypt
VCI Bags and VCI Film
VCI film is polyethylene film that carries a vapor corrosion inhibitor. Wrapped or bagged in it, a metal part stays clean, dry and free of rust in storage and in shipment, with no oil or grease to apply and none to remove. ANUBX supplies ARMOR VCI film in Egypt and helps to choose it.
How VCI film protects
The film does two things. It keeps dust and moisture from the part. And it releases a corrosion inhibitor as a vapor, which settles on the metal as a layer only a few molecules thick.
The layer forms once the part is enclosed, so the pack has to be closed. No oil or grease is needed.

Forms
ARMOR makes its VCI film in the forms a store or a packing line needs:
- Bags: flat, gusseted and with a zip closure
- Sheeting, on rolls or cut
- Tubing, cut to length and sealed
- Shrink film
- Stretch film for pallets and bundles
- Sizes and thickness to order
Which film for which job

General use, many metals
ARMOR POLY
Transparent LLDPE film for many metals at once: steel, cast iron, aluminum, copper, brass, galvanized steel and more. Heat sealable.

Bags and bin liners
ARMOR DEFENDER
Three layers of film, with the VCI in the inside layer, next to the metal. Supplied as flat bags and gusseted bags.

Outdoor storage and export
ARMOR SEA Film
Three-layer shrink film with VCI and a UV inhibitor, for equipment that stands in the yard or goes by sea.

Rough handling
ARMOR WOVEN
Woven VCI film with high resistance to punctures, for parts with edges and for rough handling.

Pallets and bundles
ARMOR POLY Stretch Film
VCI stretch film that holds a load together and protects it in transport.
How to use it
- Start with clean, dry metal. VCI keeps rust away. It does not take away rust that is there.
- Handle the parts with clean gloves.
- Wrap the part or put it in the bag, then close the pack: fold, tape, tie or heat seal.
- Keep the pack closed until the part is needed.
What ANUBX Provides in Egypt
- The choice of the material, its form and its thickness for your parts, storage time and route
- Sizes and quantities worked out from your packing list
- Technical documents (TDS, SDS) on request
- Support on site: wrapping, closing and inspection
For a quotation, send us
- The metal or metals
- The list of parts with sizes, weights and quantities, or the packing list
- How the parts are packed: single bags, boxes or pallet covers
- How long and where they are stored: indoors or outdoors, near the coast or not
- The shipment route, if there is one
Questions and answers
What does VCI mean?
Vapor corrosion inhibitor, also written volatile corrosion inhibitor. The inhibitor leaves the film as a vapor and protects the metal inside a closed pack.
Do the parts still need oil or grease?
No. ARMOR describes its VCI film as clean and dry: there is no oil or grease to apply before packing.
Which metals does it protect?
ARMOR POLY is made for many metals at once, steel, cast iron, aluminum, copper and brass among them. For a few metals and alloys ARMOR recommends a test first. Send us your metals and we check them against ARMOR's chart.
How long does the protection last?
That depends on the film, on how well the pack is closed and on where it is stored. We send ARMOR's data sheet with the quotation and advise on the film for your storage time.
Can it be used outdoors?
Film made for indoor storage is not made for sun and rain. For the yard and for export ARMOR makes SEA Film, with a UV inhibitor, shrunk tight over the equipment.
Is it supplied in Egypt?
Yes. ANUBX supplies ARMOR VCI film and bags in Egypt, with advice on the choice and support on site.
Tell us what you need to protect
We answer with the material, its form and a quotation.
Get in touch